menu
版本
2024.1.2.8726
2024.1.2.8726
2023.1.10.8659
2022.1.18.8567
2021.1.14.8108
2019.2.15.7667
2019.1.11.7296
2018.1.11.6987
2017.2.10.6745
2017.1.9.6501
2016.2.6.6153
2015.1.9.5624
2024.1.2.8726
2023.1.10.8659
2022.1.18.8567
2021.1.14.8108
2019.2.15.7667
2019.1.11.7296
2018.1.11.6987
2017.2.10.6745
2017.1.9.6501
2016.2.6.6153
2015.1.9.5624
您可以使用某些效果器插件(如 Auro Headphone 或 Resonance Audio – 可通过 Audiokinetic Launcher 安装)将 Ambisonics 信号转码为立体声配置;藉此,可将 Ambisonics 格式用作声音的中间表示形式,进而在信号到达最终输出之前有效地进行下混。
在 Ambisonics 总线上设置 Binauralizer 效果器:
在 Project Explorer(工程资源管理器)中,在 Master Audio Bus(主音频总线)下创建新的音频总线。本例中命名为了 Binaural。
In the Audio Bus category of the Property Editor for the new bus, set Configuration to one of the ambisonic configurations (while respecting the limitations of the plug-in). Ambisonics 阶数越高,空间音频的中间表示精度越高。
In the Effects tab of the Primary Editor, click Add
Effect
, then select none, to add an effect.
Click the [>>] selector and select an ambisonic binauralizer Effect from the list, such as Auro Headphone or Resonance Audio. 然后,在效果器名称右侧单击 New...(新建...)。
The New Effect dialog opens.
单击 OK(确定)。
这时会在总线上插入新的效果器。虽然总线的配置为 Ambisonics,但 Binauralizer 效果器会将其 Out Config 设为立体声。
For all sounds that require binaural processing, in the Property Editor of the sound object, set the Output Bus to the new bus you just configured.