menu
版本
2015.1.9.5624
2024.1.4.8780
2023.1.12.8706
2022.1.18.8567
2021.1.14.8108
2019.2.15.7667
2019.1.11.7296
2018.1.11.6987
2017.2.10.6745
2017.1.9.6501
2016.2.6.6153
2015.1.9.5624
2024.1.4.8780
2023.1.12.8706
2022.1.18.8567
2021.1.14.8108
2019.2.15.7667
2019.1.11.7296
2018.1.11.6987
2017.2.10.6745
2017.1.9.6501
2016.2.6.6153
2015.1.9.5624
The table below lists the properties of the Low-Frequency Oscillator (LFO) modulator. For more information on working with LFO modulators, refer to Working with LFOs.
|
Interface Element |
Description |
|---|---|
|
Name |
The name of the modulator ShareSet. |
|
Shared by |
A list of objects that currently subscribe to the selected ShareSet. |
|
Notes |
Additional information about the ShareSet or the modulator settings that have been applied. |
|
Interface Element |
Description |
|---|---|
|
Depth |
The amplitude variation of the oscillator (in percentage). Maximum amplitude is 1.0. Default value: 100 |
|
Frequency |
The number of cycles per second (in Hz). Important note: Using high frequencies with the LFO (> 40 Hz) will not work adequately on hardware audio pipeline platforms (such as Wii, 3DS, VitaHW ) as they are updated once per audio frame. Default value: 1 |
|
Waveform |
The shape of the modulator. Default value: Sine |
|
Smoothing |
Low-pass filter over the waveform to smooth hard edges (in percentage). Default value: 0 |
|
PWM (Pulse Width Modulation) |
The width of the pulse wave (in percentage); only applies to the Square waveform. Default value: 50 |
|
Attack |
The time it takes for the oscillator to reach full amplitude (in seconds). Default value: 0 |
|
Initial Phase |
The initial phase of the oscillator waveform (in degrees). Default value: 0 |
|
Scope |
Define how LFO instances are created:
Default value: Note/Event |
Related Topics