Wwise Help

The Synth One is a source plug-in that you can use to generate a wide range of sounds for your game. Synth One consists of two oscillators. The oscillator signals are generated separately, then combined to form the final output signal.

The image below illustrates the signal path of the Synth One plug-in.

	Note
	Unlike many sound editing software applications, the oscillators in Wwise are bandlimited. This not only helps to avoid inharmonicity caused by harmonics that are beyond the Nyquist frequency, but also saves on CPU and memory usage. For very high fundamental frequencies, the tone will have fewer harmonics than its non-bandlimited counterparts.

Synth One requires an input frequency to generate the oscillator outputs. The frequency mode determines how the input frequency is specified:

Synth One uses the input frequency to generate both oscillators. Each oscillator has the following configuration parameters to generate its output:

For the first oscillator, Synth One also offers frequency modulation (FM). If FM is used, then the output of the second oscillator is used to generate the output of the first.

The oscillators are then combined. Each oscillator's level is set prior to combining the signals, allowing you to completely silence one or both of the oscillators. The oscillators are combined in of two ways:

Synth One also offers noise generation: pink, white, red or purple. Just as for the oscillators, you can specify the output level of the noise generator.

The final output signal is generated by mixing the combined oscillator signal and the noise generator signal. You can specify the output level of the final signal.

You may notice that certain property values in both the Source Plug-in and Contents Editors have an indicator beside them. This indicator shows if the property value is associated with a control input using RTPCs. The control input may be a Game Parameter or a modulator. For more information on RTPCs and control inputs, refer to Working with RTPCs.

The following tables describes the two types of RTPC indicators:

Indicator	Name	Description
	RTPC - On	A property value that is tied to a control input using RTPCs.
	RTPC - Off	A property value is not tied to control input value.