Audiokinetic

Contents Editor: Master Audio, Audio, and Auxiliary Busses

This Contents Editor gives you quick access to some of the most common properties associated with the child busses of the selected master audio, Audio, or Auxiliary Bus.

Relative Properties

Interface Element

Description

Voice Volume

The attenuation (level or amplitude) applied on the current object before it is routed to a bus or sent to an Auxiliary Bus. Refer to Understanding the Voice Pipeline for more information about volumes.

Default value: 0
Range: -400 to 400
Units: dB

info	Note
info	The default slider range is from -96 to +12 dB. You can go over those limits by entering the value directly or by rolling the mouse while the focus is on the edit control.

Voice Pitch

The playback speed of an audio object, where:

Pitch 0 = Normal speed.
Pitch 1,200 = 2 x speed.
Pitch 2,400 = 4 x speed.
Pitch 4,800 = 8 x speed.
Pitch -1,200 = 0.5 speed
Pitch -2,400 = 0.25 speed
Pitch -4,800 = 0.125 speed

check_circle	Tip
check_circle	1,200 cents is equivalent to one octave.

Default value: 0
Range: -4,800 to +4,800
Units: Cents

Voice Low-pass Filter

A recursive filter that attenuates high frequencies based on the value specified.

The units for this filter represent the percentage of low-pass filtering that has been applied, where 0 means no low-pass filtering (signal unaffected) and 100 means maximal attenuation.

Default value: 0
Range: 0 to 100
Units: Percent
(For more detail, see Wwise LPF and HPF Value Cutoff Frequencies.)

Related Topics

이 페이지가 도움이 되었나요?

지원이 필요하신가요?

질문이 있으신가요? 문제를 겪고 계신가요? 더 많은 정보가 필요하신가요? 저희에게 문의해주시면 도와드리겠습니다!

지원 페이지를 방문해 주세요

작업하는 프로젝트에 대해 알려주세요. 언제든지 도와드릴 준비가 되어 있습니다.

프로젝트를 등록하세요. 아무런 조건이나 의무 사항 없이 빠른 시작을 도와드리겠습니다.

Wwise를 시작해 보세요

Wwise Help

Contents Editor: Master Audio, Audio, and Auxiliary Busses

이 페이지가 도움이 되었나요?

지원이 필요하신가요?

작업하는 프로젝트에 대해 알려주세요. 언제든지 도와드릴 준비가 되어 있습니다.