"description": "File path to write the generated WAV file. This path normally uses the file extension WAV.",
"type": "string"
},
"bitDepth": {
"description": "Bit depth of the audio file. Default is int16.",
"type": "string",
"enum": [
"int16",
"float32"
]
},
"sampleRate": {
"description": "Sample rate of the audio file. Default is 48000",
"type": "number",
"minimum": 300,
"maximum": 192000
},
"channelConfig": {
"description": "Channel configuration of the audio file. Default is 1.0. Please use the silence waveform for the ambisonics configurations, as the other tone signals will be incompatible with the format.",
"type": "string",
"enum": [
"0.1",
"1.0",
"2.0",
"2.1",
"3.0",
"4.0",
"5.1",
"7.1",
"5.1.2",
"7.1.2",
"7.1.4",
"Ambisonics 1st order",
"Ambisonics 2nd order",
"Ambisonics 3rd order",
"Ambisonics 4th order",
"Ambisonics 5th order"
]
},
"setAnonymous": {
"description": "Sets the channel configuration type to anonymous, this overrides the channel config but keeps the number of channels specified.",
"type": "boolean"
},
"sustainTime": {
"description": "Number of seconds of the signal holds at the specified level. Default is 1 second.",
"type": "number",
"minimum": 0
},
"sustainLevel": {
"description": "Decibel attenuation for the sustained signal. Default is 0 dB.",
"type": "number",
"minimum": -100,
"maximum": 0
},
"attackTime": {
"description": "Number of seconds for the signal to reach sustain level. Default is 0 second.",
"type": "number",
"minimum": 0
},
"releaseTime": {
"description": "Number of seconds for the signal to release from sustain level. Default is 0 second.",
"type": "number",
"minimum": 0
},
"waveform": {
"description": "Waveform type. Default is silence.",
"type": "string",
"enum": [
"silence",
"sine",
"triangle",
"square",
"whiteNoise"
]
},
"waveformChannelMask": {
"type": "integer",
"description": "Specifies which channels receive waveform data. The channel mask is a bit field where each bit represents a channel. The least significant bit represents the channel at index zero. The bits with 0 are silent. When not specified, the default outputs waveform data on all channels."
},
"frequency": {
"description": "Waveform frequency. Default is 440.",