Wwise Help

The 3D Meter provides four individual panels that can be used to view the meter from different viewpoints. The viewpoint in each panel can be changed. To do this, right-click anywhere within a panel and open the "Viewpoint" submenu. To reset a viewpoint to its default orientation and zoom level, right-click and select Reset Viewpoint.

It is possible to zoom in and out on each panel using the mouse wheel. When the perspective viewpoint is selected, the view can also be rotated by clicking and dragging the left mouse button.

The meter displays the directionality from the point of view of the bus. The local bus space is indicated using axes labels around the perimeter of the sphere (front/back, top/bottom, and left/right). The directional data on the meter depends on the positions of emitters that are routed through the bus, and their listeners. For example, consider an emitter source that has two listeners and is positioned directly between them on the horizontal plane. In this case, the 3D Meter would show directional data coming from both left and right.

Any positioning that is applied directly to the bus itself will not affect the meter, since this positioning is applied after the incoming sources are mixed into the bus. To observe the effect of positioning applied to a bus, the meter of the parent bus should be used.

When decoding an ambisonics signal, the spatial resolution depends on both the ambisonics order and the target speaker setup. Therefore, there may be inconsistencies between what is shown on the meter and the actual result you hear from your speaker setup.

There are various configurable settings for the 3D Meter, accessible from the Meter Settings dialog.

Interface Element	Description
	Right-click the table header to open the Configure Columns dialog where you can specify which columns to display and their order. See Using tables.
Meter Options
Meter Minimum	Determines the minimum value shown for the Meter. Default value: -72 Range: -96 to 0 Units: dB
3D Meter Options
Smoothing Options
Release	The time it takes for the output value to fall by 10 dB when the monitored level is below the current output value. Default value: 0.1 Range: 0.05 to 10 Units: s
Color Mappings
Volume Mapping: Black - Blue	Volume level above which the meter color will transition from black to blue. Default value: -20 Range: -96 to 0 Units: dB
Volume Mapping: Blue - Green	Volume level above which the meter color will transition from blue to green. Default value: -16 Range: -96 to 0 Units: dB
Volume Mapping: Green - Yellow	Volume level above which the meter color will transition from green to yellow. Default value: -12 Range: -96 to 0 Units: dB
Volume Mapping: Yellow - Orange	Volume level above which the meter color will transition from yellow to orange. Default value: -8 Range: -96 to 0 Units: dB
Volume Mapping: Orange - Red	Volume level above which the meter color will transition from orange to red. Default value: -4 Range: -96 to 0 Units: dB
Volume Mapping: Red	Volume level above which the meter color will be red. Default value: 0 Range: -96 to 0 Units: dB