Wwise Help

[name]

The name of the object.

(Object Color)

Displays the object's color. Clicking the icon opens the color selector.

Select a color to apply it to the object. When you choose a color for an object, a palette icon appears on the selected square, as well as a yellow triangle in the lower-right corner, as shown.

To inherit the parent object's color, select the square at the far left of the color selector.

(Mute and Solo)

Controls the Mute and Solo states for the object and shows the implicit mute and solo states for the object.

Muting an object silences this object for the current monitoring session. Soloing an object silences all the other objects in the project except this one.

A bold M or S indicates that the Mute or Solo state has been explicitly set for the object. A non-bold M or S with faded color indicates that the object's Mute or Solo state was implicitly set from another object's state.

Muting an object implicitly mutes the descendant objects.

Soloing an object implicitly mutes the sibling objects and implicitly solos the descendant and ancestor objects.

	Tip
	Hold the Ctrl key while clicking a solo button to exclusively solo the object for which the solo button is associated.

	Note
	Mute and Solo are designed to be used for monitoring purposes only and are not persisted in the project or stored in the SoundBanks.

(Show references)

Indicates the number of elements in your project that contain direct references to the object. The icon is displayed in orange when references to the object exist, and in gray when no references exist.

Selecting the button opens the Reference View with the object's name in the References to: field.

Enter text in the search field to find specific properties or property groups. Results are displayed as you type. The search is not case-sensitive and searches all properties associated with an object, even if their category is not selected for display.

When a search is active, an x appears at the far-right side of the field and all category buttons are unavailable. Click the x to clear the search.

(Only Show Modified)

When selected, only properties that have been modified from their default value are displayed and all category filter buttons are unavailable. If a search is active, it is only applied to modified properties.

Modified properties are displayed with an orange band at the left side of the property list and at the left side of the corresponding category button.

(Show/Hide Category Filters)

Opens a list of all categories associated with the object currently loaded in the Property Editor. For each category selected in the list, a corresponding button is displayed at the top of the list of properties. Select these buttons to display the related properties. Ctrl+click or Shift+click to select multiple buttons.

Always Show Additional Properties expands the less frequently used properties, which are collapsed by default.

(More Options)

Opens the following options:

(Open Property Editor Settings)

Opens the Object Property Settings dialog, which allows you to configure which properties are available for display in the Property Editor.

(Open in New Window)

Duplicates the Property Editor as a floating view. An instance of the editor remains in the Object Tab.

Playback Speed

Adjusts the speed at which the music object’s contents are played:

The Playback Speed affects different media types differently:

	Note
	This value is multiplied by the Playback Speed of the object’s ancestors to determine the effective playback speed of the object.

	Note
	During an Interactive Music playback instance, the effective playback speed of the active Segment is applied to all playing Segments of the same playback instance. This is particularly important during the transition between two segments when a crossfade is applied. The fading-in (newly active) Segment’s playback speed is applied to the fading-out (previously active) Segment.

Default value: 1

Range: 0.25 to 4

Mode

Specifies how the sound engine will determine which path to select when there is more than one pre-defined path that matches the States or Switches triggered at runtime.

Several pre-defined paths can match the States or Switches triggered at runtime due to the use of wildcards (*) in fallback paths.

Default value: Best Match

Continue to play on Switch change

Determines whether a music object that is in more than one Switch will continue to play when a new Switch is triggered.

If this option is selected and the music object is in both Switches, it will continue playing as if no Switch change had occurred. If a change in Switch occurs and this option is unselected, the music object will stop playing at the next sync point and will start again from the beginning.

Default value: true

Override parent

Determines whether the time settings behaviors will be inherited from the parent or defined at the current level in the hierarchy. When this option is not selected, the time settings controls are unavailable.

If the object is a top-level object, this option is unavailable.

Default value: false

Tempo

The speed or pace of the music object. This setting should match the tempo of the original music source.

The tempo and time signature settings define the timeline ruler in the Music Editor, so you can easily position sync points at the next beat, bar, or grid.

Default value: 120

Range: 1 to 400

Units: BPM

Time Signature

The number and length of beats to the bar. This setting should match the time signature of the original music source.

Default value: 4

Range: 1 to 64

Time Signature

The number and length of beats to the bar. This setting should match the time signature of the original music source.

Default value: 4

Frequency

Specifies an arbitrary method by which the Music Segment can be virtually partitioned. By adding another level of granularity to the Music Segment, you have a great deal of flexibility to determine sync points for music transitions, state changes, and stingers.

The Frequency and Offset settings define the behavior of the Next Grid option for state changes, transitions, and stingers.

Default value: 4 Bars

Offset

Creates an offset to the frequency value. You can select a standard offset value from the list or create a custom offset in milliseconds.

Default value: No

Offset Ms

The offset in milliseconds. Applicable if specifying a Custom offset.

Default value: 0

Range: 0 to 99999

Override Color

Enables the Color slider to change the color chip of the selected objects.

Default value: false

Color

Displays a square filled with either the object’s defined color, or if none is set, a randomly applied color. This key helps identify the object line displayed in the graph view.

Default value: 0

Range: 0 to 26

Inclusion

Determines whether the element is included in the SoundBanks when they are generated. When selected, the element is included. When unselected, the element is not included.

To optimize your sound design for each platform, you might want to exclude certain elements on certain platforms. By default, this check box applies across all platforms. Use the Link indicator to the left of the check box to unlink the element. Then you can customize the state of the check box per platform.

When this option is unselected, the property and behavior options in the editor become unavailable.

Default value: true

Voice Volume

The attenuation (level or amplitude) applied on the current object before it is routed to a bus or sent to an Auxiliary Bus. Refer to Understanding the Voice Pipeline for more information about volumes.

	Note
	The default slider range is from -96 to +12 dB. You can go over those limits by entering the value directly or by rolling the mouse while the focus is on the edit control.

Default value: 0

Range: -200 to 200

Units: dB

Voice Low-pass Filter

A recursive filter that attenuates high frequencies based on the value specified.

The units for this filter represent the percentage of low-pass filtering that has been applied, where 0 means no low-pass filtering (signal unaffected) and 100 means maximal attenuation.

(For more detail, see Wwise LPF and HPF Value Cutoff Frequencies .)

Default value: 0

Range: 0 to 100

Units: %

Voice High-pass Filter

A recursive filter that attenuates low frequencies based on the value specified.

The units for this filter represent the percentage of high-pass filtering that has been applied, where 0 means no high-pass filtering (signal unaffected) and 100 means maximal attenuation.

Default value: 0

Range: 0 to 100

Units: %

Make-up Gain

Volume gain in decibels (dB) applied to the voice, after all other volume adjustments. The make-up gain is additive across the Actor-Mixer Hierarchy.

Refer to Understanding the voice pipeline to learn about how voices are being processed, how they are being routed and where the different volumes and Effects are being applied.

For more information about the Make-up Gain, refer to Using Loudness Normalization or Make-up gain to Adjust Volume .

	Note
	The default slider range is from -96 to +12. You can go over those limits by entering the value directly, or by rolling the mouse while the focus is on the edit control.

Default value: 0

Range: -96 to 96

Units: dB