Wwise Help

Inclusion

Determines whether the element is included or excluded. When selected, the element is included. When unselected, the element is not included. By default, this applies across all platforms. Use the Link indicator (to the left of the check box) to determine or to set platform-specific customizations.

When this option is unselected, the property and behavior options in the Property Editor become unavailable.

Name

The name of the Effect instance.

Effect instances are a group of effect property settings. They can be one of two types: custom instances or ShareSets. Custom instances can be used by only one object, whereas ShareSets can be shared across several objects.

Effect

The type of effect.

Shared by (Used by)

A list of objects that currently subscribe to the selected ShareSet.

This field is called “Used by” when editing a custom instance of the Effect.

Opens a search field where standard alphanumeric entries filter out unmatching elements from the view. Learn more in Using Tables.

Click the Close icon to the left of the search icon to close the search field and remove the filter.

	Note
	The searches do not include elements in collapsed nodes of the List View, Query Editor, MIDI Keymap Editor, and Reference View.

Returns the Effect property settings to their default values.

This option is only available when editing a custom instance of the Effect.

Notes

Additional information about the Effect.

Effect Settings

Left/Right Delay Parameters

Input

This parameter determines which channel(s) will be used to feed the corresponding (left or right) delay line.

Values:

Enable Feedback

This parameter determines whether the output of the delay line is fed back to the input of the same delay length.

Default Value: False

Feedback Gain

Gain applied to the feedback path before its re-injection into the same delay line input.

	Warning
	Using high feedback gains can build up very high signal levels depending on the input signal content.

Default Value: -12
Range: -48 to 0
Units: dB

Enable Crossfeed L/R

This parameter determines whether the output of the delay line is fed back to the input of the delay length of the other channel's delay line. Left delay output can thus feed the right delay input and vice versa. This setting allows to create ping-pong type stereo-delays.

Default Value: False

Crossfeed L/R Gain

Gain applied to the feedback path before its re-injection into the other channel delay line input.

	Warning
	Using high crossfeed gains can build up very high signal levels depending on the input signal content.

Default Value: -12
Range: -48 to 0
Units: dB

Filter Parameters

Type

Determines the type of filtering that can be applied to the wet signal. The following filters are available:

Gain

The amount of the amplification of the wet signal for the selected frequency band. Increasing this value “boosts” the audio signal. Decreasing this value “cuts” or attenuates the audio signal.

Default value: 0
Range: -24 to +24
Units: dB

	Note
	The Gain controls are not available when the Low Pass, High Pass, Notch, and Band Pass curves have been selected because these filter types have their passband normalized at 0 dB.

Frequency

The portion of the frequency spectrum that will be affected by the gain.

Range: 20 to 20,000
Units: Hz

Q

The area around the center frequency that will be affected by the change in gain. A low Q value means that the bandwidth range will be wide, and conversely a high Q value means that the bandwidth range will be narrow.

Default value: 1.0
Range: 0.1 to 20

This control is not available when the Low Pass, High Pass, Low Shelf, and High Shelf curves have been selected.

Output Levels

Dry

Gain applied to unprocessed signal.

Default value: 0
Range: -96 to 24
Units: dB

	Note
	This property has no effect when the delay is used in an Auxiliary Bus. In this case, the dry level of the signal is defined by the object sending to the Auxiliary Bus.

Wet

Gain applied to the delayed signal.

Default value: 0
Range: -96 to 24
Units: dB

F/R Balance

Front/rear extent of the stereo effect. For example a value of -100 will only have wet signal in the front channels. A value of 0 will have wet signal in both front and rear speakers. A value of 100 will have wet signal only in the rear channels.

Default value: -100
Range: -100 to 100
Units: None