Wwise Help

To set the properties of a source:

1. Load a Music Switch or Playlist Container into the Property Editor.

2. Switch to the Transitions tab.

3. Select a transition from the Transition Matrix.

   You can now edit the properties of the source for this transition.

4. If the source is in a Switch Container, select one of the following options from the Exit source at list:

   Immediate: The source stops playing immediately.

   Next Grid: The source stops playing at the next grid interval. The grid is an arbitrary method by which music objects can be virtually partitioned.

   Next Bar: The source stops playing at the next bar.

   Next Beat: The source stops playing at the next beat.

   Next Cue: The source stops playing at the next cue, whether it be a custom cue or the exit cue.

   Next Custom Cue: The source stops playing at the next custom cue. If the current Music Segment doesn't contain a custom cue, Wwise continues to the next segment until it finds a custom cue.

   Exit Cue: The source stops playing at the exit cue.

5. If you selected Next Cue or Next Custom Cue, you may further refine the selection of valid cues where the transition may occur by entering a cue name in the Match edit box.

6. If you want the post-exit of the source to play during the transition, select Play post-exit.

   	Note
   	The post-exit of a source will only play if that source exits at its exit cue, or fades out at or beyond its exit cue. Otherwise, the post-exit will never play during a transition.

7. If you want the source to end playing with a fade-out, select Fade-out.

To set the properties of a destination:

1. Load a Music Switch or Playlist Container into the Property Editor.

2. Switch to the Transitions tab.

3. Select a transition from the Transition Matrix.

   You can now edit the properties of the destination for this transition.

4. If the destination is a Music Playlist Container, you can select a specific item within the Playlist Container to be played first. Click the Browse button (...) to specify the item for the Jump to playlist item option.

5. If the owner of the transition is a Switch Container, select one of the following options from the Sync to list:

   Entry Cue: The destination will begin playing at its entry cue.

   Same Time as Playing Segment: The destination will begin playing at the same time mark as the source segment. For example, if the source segment has been playing for 10 seconds since its beginning, the destination will start playing 10 seconds in.

   Random Cue: The destination will begin playing at a randomly chosen cue. When this option is selected, any cue can be chosen, including the entry cue or any custom cue.

   Random Custom Cue: The destination will begin playing at a randomly chosen custom cue. If there are no custom cues in the segment, the entry cue will be used.

6. If you selected Random Cue or Random Custom Cue, you may further refine the selection of valid start positions with the Custom Cue Filter.

   Match: Only cues with this name may be selected as the start position.

   Match source cue name: Only cues which name is the same as the name of the cue that was used in the source segment for this transition may be selected as the start position.

7. If you want the pre-entry of the destination to play during the transition, select Play pre-entry.

8. If you want the destination to begin playing with a fade-in, select Fade-in.