|
Wwise SDK 2024.1.0
|
Refer to Using the Wwise Authoring API (WAAPI) for more information about Wwise Authoring API.
ak.soundengine.executeActionOnEvent
Executes an action on all nodes that are referenced in the specified event in a Play action. See AK::SoundEngine::ExecuteActionOnEvent.
ak.soundengine.getState
Gets the current state of a State Group. When using setState just prior to getState, allow a brief delay (no more than 10ms) for the information to update in the sound engine.
ak.soundengine.getSwitch
Gets the current state of a Switch Group for a given Game Object.
ak.soundengine.loadBank
Load a SoundBank. See AK::SoundEngine::LoadBank.
ak.soundengine.postEvent
Asynchronously post an Event to the sound engine (by event ID). See AK::SoundEngine::PostEvent.
ak.soundengine.postMsgMonitor
Display a message in the Profiler's Capture Log view.
ak.soundengine.postTrigger
Posts the specified Trigger. See AK::SoundEngine::PostTrigger.
ak.soundengine.registerGameObj
Register a game object. Registering a game object twice does nothing. Unregistering it once unregisters it no matter how many times it has been registered. See AK::SoundEngine::RegisterGameObj.
ak.soundengine.resetRTPCValue
Resets the value of a real-time parameter control to its default value, as specified in the Wwise project. See AK::SoundEngine::ResetRTPCValue.
ak.soundengine.seekOnEvent
Seeks inside all playing objects that are referenced in Play Actions of the specified Event. See AK::SoundEngine::SeekOnEvent.
ak.soundengine.setDefaultListeners
Sets the default active listeners for all subsequent game objects that are registered. See AK::SoundEngine::SetDefaultListeners.
ak.soundengine.setGameObjectAuxSendValues
Sets the Auxiliary Busses to route the specified game object. See AK::SoundEngine::SetGameObjectAuxSendValues.
ak.soundengine.setGameObjectOutputBusVolume
Set the output bus volume (direct) to be used for the specified game object. See AK::SoundEngine::SetGameObjectOutputBusVolume.
ak.soundengine.setListeners
Sets a single game object's active listeners. By default, all new game objects have no listeners active, but this behavior can be overridden with SetDefaultListeners(). Inactive listeners are not computed. See AK::SoundEngine::SetListeners.
ak.soundengine.setListenerSpatialization
Sets a listener's spatialization parameters. This lets you define listener-specific volume offsets for each audio channel. See AK::SoundEngine::SetListenerSpatialization.
ak.soundengine.setMultiplePositions
Sets multiple positions for a single game object. Setting multiple positions for a single game object is a way to simulate multiple emission sources while using the resources of only one voice. This can be used to simulate wall openings, area sounds, or multiple objects emitting the same sound in the same area. See AK::SoundEngine::SetMultiplePositions.
ak.soundengine.setObjectObstructionAndOcclusion
Set a game object's obstruction and occlusion levels. This function is used to affect how an object should be heard by a specific listener. See AK::SoundEngine::SetObjectObstructionAndOcclusion.
ak.soundengine.setPosition
Sets the position of a game object. See AK::SoundEngine::SetPosition.
ak.soundengine.setRTPCValue
Sets the value of a real-time parameter control. See AK::SoundEngine::SetRTPCValue.
ak.soundengine.setScalingFactor
Sets the scaling factor of a game object. You can modify the attenuation computations on this game object to simulate sounds with a larger or smaller affected areas. See AK::SoundEngine::SetScalingFactor.
ak.soundengine.setState
Sets the State of a State Group. See AK::SoundEngine::SetState.
ak.soundengine.setSwitch
Sets the State of a Switch Group. See AK::SoundEngine::SetSwitch.
ak.soundengine.stopAll
Stop playing the current content associated to the specified game object ID. If no game object is specified, all sounds are stopped. See AK::SoundEngine::StopAll.
ak.soundengine.stopPlayingID
Stops the current content, associated to the specified playing ID, from playing. See AK::SoundEngine::StopPlayingID.
ak.soundengine.unloadBank
Unload a SoundBank. See AK::SoundEngine::UnloadBank.
ak.soundengine.unregisterGameObj
Unregisters a game object. Registering a game object twice does nothing. Unregistering it once unregisters it no matter how many times it has been registered. Unregistering a game object while it is in use is allowed, but the control over the parameters of this game object is lost. For example, say a sound associated with this game object is a 3D moving sound. It stops moving when the game object is unregistered, and there is no way to regain control over the game object. See AK::SoundEngine::UnregisterGameObj.
ak.wwise.console.project.close
Closes the current project. This operation is synchronous.
ak.wwise.console.project.create
Creates, saves and opens new empty project, specified by path and platform. The project has no factory setting WorkUnit. This operation is synchronous.
ak.wwise.console.project.open
Opens a project, specified by path. This operation is synchronous.
ak.wwise.core.audio.convert
Creates a converted audio file. When errors occur, this function returns a list of messages with corresponding levels of severity.
ak.wwise.core.audio.import
Creates Wwise objects and imports audio files. This function does not return an error when something fails during the import process, please refer to the log for the result of each import command. This function uses the same importation processor available through the Tab Delimited import in the Audio File Importer. The function returns an array of all objects created, replaced or re-used. Use the options to specify how the objects are returned. For more information, refer to Importing Audio Files and Creating Structures.
ak.wwise.core.audio.importTabDelimited
Scripted object creation and audio file import from a tab-delimited file.
ak.wwise.core.audio.mute
Mutes an object.
ak.wwise.core.audio.resetMute
Unmute all muted objects.
ak.wwise.core.audio.resetSolo
Unsolo all soloed objects.
ak.wwise.core.audio.setConversionPlugin
Changes the plug-in to use for audio file conversion.
ak.wwise.core.audio.solo
Solos an object.
ak.wwise.core.audioSourcePeaks.getMinMaxPeaksInRegion
Gets the min/max peak pairs, in the given region of an audio source, as a collection of binary strings (one per channel). The strings are base-64 encoded, 16-bit signed int arrays, with min and max values being interleaved. If getCrossChannelPeaks is true, only one binary string represents the peaks across all channels globally.
ak.wwise.core.audioSourcePeaks.getMinMaxPeaksInTrimmedRegion
Gets the min/max peak pairs in the entire trimmed region of an audio source, for each channel, as an array of binary strings (one per channel). The strings are base-64 encoded, 16-bit signed int arrays, with min and max values being interleaved. If getCrossChannelPeaks is true, there is only one binary string representing peaks across all channels globally.
ak.wwise.core.blendContainer.addAssignment
Adds a new assignment to a Blend Track. Equivalent to performing a drag-and-drop operation in the Blend Tracks Editor.
ak.wwise.core.blendContainer.addTrack
Adds a new Blend Track to a Blend Container. Equivalent to clicking New Blend Track in the Blend Track Editor. To get the list of Blend Tracks, use the function ak.wwise.core.object.get with {return = "blendTracks"}.
ak.wwise.core.blendContainer.getAssignments
Returns a list of a Blend Track assignments.
ak.wwise.core.blendContainer.removeAssignment
Removes an assignment from a Blend Track. Equivalent to deleting an entry in the Blend Tracks Editor.
ak.wwise.core.executeLuaScript
Execute a Lua script. Optionally, specify additional Lua search paths, additional modules, and additional Lua scripts to load prior to the main script. The script can return a value. All arguments will be passed to the Lua script in the "wa_args" global variable.
ak.wwise.core.gameParameter.setRange
Sets the Min and Max properties on a Game Parameter. Modifies the RTPC curves and blend tracks that use this Game Parameter for their X axis.
ak.wwise.core.getInfo
Retrieve global Wwise information.
ak.wwise.core.getProjectInfo
Retrieve information about the current project opened, including platforms, languages and project directories.
ak.wwise.core.log.addItem
Adds a new item to the logs on the specified channel.
ak.wwise.core.log.clear
Clears the logs on the specified channel.
ak.wwise.core.log.get
Retrieves the latest log for a specific channel. Refer to ak.wwise.core.log.itemAdded to be notified when an item is added to the log. The log is empty when used in WwiseConsole.
ak.wwise.core.object.copy
Copies an object to the given parent. Note that if a Work Unit is copied, the operation cannot be undone and the project will be saved.
ak.wwise.core.object.create
Creates an object of type 'type', as a child of 'parent'. Refer to Importing Audio Files and Creating Structures for more information about creating objects. Also refer to ak.wwise.core.audio.import to import audio files to Wwise. To create Effect or Source plug-ins, use ak.wwise.core.object.set, and refer to Wwise Objects Reference for the classId.
ak.wwise.core.object.delete
Deletes the specified object. Note that if a Work Unit is deleted, the operation cannot be undone and the project will be saved.
ak.wwise.core.object.diff
Compares properties and lists of the source object with those in the target object.
ak.wwise.core.object.get
Performs a query and returns the data, as specified in the options, for each object in the query result. The query can specify either a 'waql' argument or a 'from' argument with an optional 'transform' argument. Refer to Using the Wwise Authoring Query Language (WAQL) or Querying the Wwise Project for more information. Refer to Return Options to learn about options.
ak.wwise.core.object.getAttenuationCurve
Gets the specified attenuation curve for a given attenuation object.
ak.wwise.core.object.getPropertyAndReferenceNames
Retrieves the list of property and reference names for an object.
ak.wwise.core.object.getPropertyInfo
Retrieves information about an object property. Note that this function does not return the value of a property. To retrieve the value of a property, refer to ak.wwise.core.object.get and Return Options.
ak.wwise.core.object.getPropertyNames
ak.wwise.core.object.getTypes
Retrieves the list of all object types registered in Wwise's object model. This function returns the equivalent of Wwise Objects Reference .
ak.wwise.core.object.isLinked
Indicates whether a property, reference, or object list is bound to a particular platform or to all platforms.
ak.wwise.core.object.isPropertyEnabled
Returns true if a property is enabled based on the values of the properties it depends on.
ak.wwise.core.object.move
Moves an object to the given parent. Returns the moved object.
ak.wwise.core.object.pasteProperties
Pastes properties, references and lists from one object to any number of target objects. Only those properties, references and lists which differ between source and target are pasted. Refer to Wwise Objects Reference for more information on the properties, references and lists available on each object type.
ak.wwise.core.object.set
Allows for batch processing of the following operations: Object creation in a child hierarchy, Object creation in a list, Setting name, notes, properties and references. Refer to Importing Audio Files and Creating Structures for more information about creating objects. Also refer to ak.wwise.core.audio.import to import audio files to Wwise.
ak.wwise.core.object.setAttenuationCurve
Sets the specified attenuation curve for a given attenuation object.
ak.wwise.core.object.setLinked
Link or unlink a property/reference or object list to a particular platform.
ak.wwise.core.object.setName
Renames an object.
ak.wwise.core.object.setNotes
Sets the object's notes.
ak.wwise.core.object.setProperty
Sets a property value of an object for a specific platform. Refer to Wwise Objects Reference for more information on the properties available on each object type. Refer to ak.wwise.core.object.setReference to set a reference to an object. Refer to ak.wwise.core.object.get to obtain the value of a property for an object.
ak.wwise.core.object.setRandomizer
Sets the randomizer values of a property of an object for a specific platform. Refer to Wwise Objects Reference for more information on the properties available on each object type.
ak.wwise.core.object.setReference
Sets an object's reference value. Refer to Wwise Objects Reference for more information on the references available on each object type.
ak.wwise.core.object.setStateGroups
Sets the State Group objects associated with an object. Note, this will remove any previously associated State Group.
ak.wwise.core.object.setStateProperties
Set the state properties of an object. Note, this will remove any previous state property, including the default ones.
ak.wwise.core.plugin.getList
ak.wwise.core.plugin.getProperties
ak.wwise.core.plugin.getProperty
ak.wwise.core.profiler.enableProfilerData
Specifies the type of data you want to capture. Overrides the user's profiler settings.
ak.wwise.core.profiler.getAudioObjects
Retrieves the Audio Objects at a specific profiler capture time.
ak.wwise.core.profiler.getBusses
Retrieves the busses at a specific profiler capture time.
ak.wwise.core.profiler.getCpuUsage
Retrieves CPU usage statistics at a specific profiler capture time. This data can also be found in the Advanced Profiler, under the CPU tab. To ensure the CPU data is received, refer to ak.wwise.core.profiler.enableProfilerData. The returned data includes "Inclusive" and "Exclusive" values, where "Inclusive" refers to the time spent in the element plus the time spent in any called elements, and "Exclusive" values pertain to execution only within the element itself.
ak.wwise.core.profiler.getCursorTime
Returns the current time of the specified profiler cursor, in milliseconds.
ak.wwise.core.profiler.getGameObjects
Retrieves the game objects at a specific profiler capture time.
ak.wwise.core.profiler.getLoadedMedia
Retrieves the loaded media at a specific profiler capture time. This data can also be found in the Advanced Profiler, under the Loaded Media tab. To ensure the Loaded Media data is received, refer to ak.wwise.core.profiler.enableProfilerData.
ak.wwise.core.profiler.getMeters
Retrieves the Meter data for all registered busses, aux busses and devices. Only the master audio bus is registered by default. Use ak.wwise.core.profiler.registerMeter for other busses, before retrieval of the meter data.
ak.wwise.core.profiler.getPerformanceMonitor
Retrieves the Performance Monitor statistics at a specific profiler capture time. Refer to Wwise Authoring Performance Monitor Counter Identifiers for the available counters.
ak.wwise.core.profiler.getRTPCs
Retrieves active RTPCs at a specific profiler capture time.
ak.wwise.core.profiler.getStreamedMedia
Retrieves the streaming media at a specific profiler capture time. This data can also be found in the Advanced Profiler, under the Streams tab. To ensure the Streams data is received, refer to ak.wwise.core.profiler.enableProfilerData.
ak.wwise.core.profiler.getVoiceContributions
Retrieves all parameters affecting voice volume, highpass and lowpass for a voice path, resolved from pipeline IDs.
ak.wwise.core.profiler.getVoices
Retrieves the voices at a specific profiler capture time.
ak.wwise.core.profiler.registerMeter
Registers a bus, an aux bus or device to receive meter data. Only the master audio bus is registered by default. Use ak.wwise.core.profiler.getMeters to retrieve the meter data after registering. Every call to ak.wwise.core.profiler.registerMeter must have a matching call to ak.wwise.core.profiler.unregisterMeter.
ak.wwise.core.profiler.saveCapture
Saves profiler as a .prof file according to the given file path.
ak.wwise.core.profiler.startCapture
Starts the profiler capture and returns the time at the beginning of the capture, in milliseconds.
ak.wwise.core.profiler.stopCapture
Stops the profiler capture and returns the time at the end of the capture, in milliseconds.
ak.wwise.core.profiler.unregisterMeter
Unregisters a bus or device that was registered with ak.wwise.core.profiler.registerMeter.
ak.wwise.core.project.save
Saves the current project.
ak.wwise.core.remote.connect
Connects the Wwise Authoring application to a Wwise Sound Engine running executable or to a saved profile file. The host must be running code with communication enabled. If only "host" is provided, Wwise connects to the first Sound Engine instance found. To distinguish between different instances, you can also provide the name of the application to connect to.
ak.wwise.core.remote.disconnect
Disconnects the Wwise Authoring application from a connected Wwise Sound Engine running executable.
ak.wwise.core.remote.getAvailableConsoles
Retrieves all consoles available for connecting Wwise Authoring to a Sound Engine instance.
ak.wwise.core.remote.getConnectionStatus
Retrieves the connection status.
ak.wwise.core.sound.setActiveSource
Sets which version of the source is being used for the specified sound. Use ak.wwise.core.object.get with the 'activeSource' return option to get the active source of a sound.
ak.wwise.core.soundbank.convertExternalSources
Converts the external sources files for the project as detailed in the wsources file, and places them into either the default folder, or the folder specified by the output argument. External Sources are a special type of source that you can put in a Sound object in Wwise. It indicates that the real sound data will be provided at run time. While External Source conversion is also triggered by SoundBank generation, this operation can be used to process sources not contained in the Wwise Project. Please refer to Wwise SDK help page "Integrating External Sources".
ak.wwise.core.soundbank.generate
Generate a list of SoundBanks with the import definition specified in the WAAPI request. If you do not write the SoundBanks to disk, subscribe to ak.wwise.core.soundbank.generated to receive SoundBank structure info and the bank data as base64. Note: This is a synchronous operation.
ak.wwise.core.soundbank.getInclusions
Retrieves a SoundBank's inclusion list.
ak.wwise.core.soundbank.processDefinitionFiles
Imports SoundBank definitions from the specified file. Multiple files can be specified. See the WAAPI log for status messages.
ak.wwise.core.soundbank.setInclusions
Modifies a SoundBank's inclusion list. The 'operation' argument determines how the 'inclusions' argument modifies the SoundBank's inclusion list; 'inclusions' may be added to / removed from / replace the SoundBank's inclusion list.
ak.wwise.core.sourceControl.add
Add files to source control. Equivalent to Mark for Add for Perforce.
ak.wwise.core.sourceControl.checkOut
Check out files from source control. Equivalent to Check Out for Perforce.
ak.wwise.core.sourceControl.commit
Commit files to source control. Equivalent to Submit Changes for Perforce.
ak.wwise.core.sourceControl.delete
Delete files from source control. Equivalent to Mark for Delete for Perforce.
ak.wwise.core.sourceControl.getSourceFiles
Retrieve all original files.
ak.wwise.core.sourceControl.getStatus
Get the source control status of the specified files.
ak.wwise.core.sourceControl.move
Move or rename files in source control. Always pass the same number of elements in files and newFiles. Equivalent to Move for Perforce.
ak.wwise.core.sourceControl.revert
Revert changes to files in source control.
ak.wwise.core.sourceControl.setProvider
Change the source control provider and credentials. This is the same setting as the Source Control option in the Project Settings dialog in Wwise.
ak.wwise.core.switchContainer.addAssignment
Assigns a Switch Container's child to a Switch. This is the equivalent of doing a drag&drop of the child to a state in the Assigned Objects view. The child is always added at the end for each state.
ak.wwise.core.switchContainer.getAssignments
Returns the list of assignments between a Switch Container's children and states.
ak.wwise.core.switchContainer.removeAssignment
Removes an assignment between a Switch Container's child and a State.
ak.wwise.core.transport.create
Creates a transport object for the given Wwise object. The return transport object can be used to play, stop, pause and resume the Wwise object via the other transport functions.
ak.wwise.core.transport.destroy
Destroys the given transport object.
ak.wwise.core.transport.executeAction
Executes an action on the given transport object, or all transport objects if none is specified.
ak.wwise.core.transport.getList
Returns the list of transport objects.
ak.wwise.core.transport.getState
Gets the state of the given transport object.
ak.wwise.core.transport.prepare
Prepare the object and its dependencies for playback. Use this function before calling PostEventSync or PostMIDIOnEventSync from IAkGlobalPluginContext.
ak.wwise.core.undo.beginGroup
Begins an undo group. Make sure to call ak.wwise.core.undo.endGroup exactly once for every ak.wwise.core.beginUndoGroup call you make. Calls to ak.wwise.core.undo.beginGroup can be nested. When closing a WAMP session, a check is made to ensure that all undo groups are closed. If not, a cancelGroup is called for each of the groups still open.
ak.wwise.core.undo.cancelGroup
Cancels the last undo group.
ak.wwise.core.undo.endGroup
Ends the last undo group.
ak.wwise.core.undo.redo
Redoes the last operation in the Undo stack.
ak.wwise.core.undo.undo
Undoes the last operation in the Undo stack.
ak.wwise.debug.enableAsserts
Enables debug assertions. Every call to enableAsserts with 'false' increments the ref count. Calling with true decrements the ref count. This is only available with Debug builds.
ak.wwise.debug.enableAutomationMode
Enables or disables the automation mode for Wwise. This reduces the potential interruptions caused by message boxes and dialogs. For instance, enabling the automation mode silently accepts: project migration, project load log, EULA acceptance, project licence display and generic message boxes.
ak.wwise.debug.generateToneWAV
Generate a WAV file playing a tone with a simple envelope and save it to the specified location. This is provided as a utility to generate test WAV files.
ak.wwise.debug.getWalTree
Retrieves the WAL tree, which describes the nodes that are synchronized in the Sound Engine. Private use only.
ak.wwise.debug.restartWaapiServers
Restart WAAPI servers. For internal use only.
ak.wwise.debug.testAssert
Private use only.
ak.wwise.debug.testCrash
Private use only.
ak.wwise.debug.validateCall
Validate the arguments, options and result of a WAAPI function call. Does not actually call the function. This is only available with Debug builds.
ak.wwise.ui.bringToForeground
Bring Wwise main window to foreground. Refer to SetForegroundWindow and AllowSetForegroundWindow on MSDN for more information on the restrictions. Refer to ak.wwise.core.getInfo to obtain the Wwise process ID for AllowSetForegroundWindow.
ak.wwise.ui.captureScreen
Captures a part of the Wwise UI relative to a view.
ak.wwise.ui.commands.execute
Executes a command. Some commands can take a list of objects as parameters. Refer to Wwise Authoring Command Identifiers for the available commands.
ak.wwise.ui.commands.getCommands
Gets the list of commands.
ak.wwise.ui.commands.register
Registers an array of add-on commands. Registered commands remain until the Wwise process is terminated. Refer to Defining Command Add-ons for more information about registering commands. Also refer to ak.wwise.ui.commands.executed.
ak.wwise.ui.commands.unregister
Unregisters an array of add-on UI commands.
ak.wwise.ui.getSelectedObjects
Retrieves the list of objects currently selected by the user in the active view.
ak.wwise.ui.layout.dockView
Dock a floating view into a layout.
ak.wwise.ui.layout.getCurrentLayoutName
Retrieves the current layout name.
ak.wwise.ui.layout.getElementRectangle
Retrieves the current allocated rectangle of a layout element. An empty rect is returned if the element is not found.
ak.wwise.ui.layout.getLayout
Serializes a specific layout into a JSON format.
ak.wwise.ui.layout.getLayoutNames
Retrieves a list of the factory layout names.
ak.wwise.ui.layout.getOrCreateView
Gets a view, if it exists in the current layout, or creates a new one.
ak.wwise.ui.layout.getViewInstances
Retrieves a list of all view instances of a layout.
ak.wwise.ui.layout.getViewTypes
Retrieves a list of all view types registered in Wwise.
ak.wwise.ui.layout.moveSplitter
Moves a splitter by a delta given in pixels.
ak.wwise.ui.layout.removeLayout
Unregisters a temporary layout, previously registered with ak.wwise.ui.layout.setLayout.
ak.wwise.ui.layout.setLayout
Registers a new layout from a JSON format.
ak.wwise.ui.layout.switchLayout
Switches the current layout.
ak.wwise.ui.layout.undockView
Undock a view from a layout.
ak.wwise.ui.project.close
Closes the current project.
ak.wwise.ui.project.create
Creates, saves and opens new empty project, specified by path and platform. The project has no factory setting WorkUnit. Please refer to ak.wwise.core.project.loaded for further explanations on how to be notified when the operation has completed.
ak.wwise.ui.project.open
Opens a project, specified by path. Please refer to ak.wwise.core.project.loaded for further explanations on how to be notified when the operation has completed.
ak.wwise.waapi.getFunctions
Retrieves the list of functions.
ak.wwise.waapi.getSchema
Retrieves the JSON schema of a Waapi URI.
ak.wwise.waapi.getTopics
Retrieves the list of topics to which a client can subscribe.
Questions? Problems? Need more info? Contact us, and we can help!
Visit our Support pageRegister your project and we'll help you get started with no strings attached!
Get started with Wwise