AK ASIO Output

(See the AK ASIO output properties below.)

The AK ASIO Output plug-in uses the Steinberg Audio Stream Input/Output (ASIO) SDK in order to connect to ASIO-compatible output devices.

Monitoring in Wwise authoring through an AK ASIO output device

To monitor your project in the Wwise authoring tool through an AK ASIO output device, an ASIO driver can be selected for a master bus from the Authoring Audio Preferences dialog. (See Setting the preferred Audio Devices for more information.)

Selecting an ASIO driver outside of Wwise Authoring

To select an ASIO hardware device outside of the Wwise authoring tool, it is necessary to create a "WWISEASIODRV" environment variable with a value set to match the ASIO driver name specified for a master bus in Authoring Audio Preferences.

For example, with an AK ASIO Output Audio Device ShareSet named "ASIO_Output", if "ASIO_Output - Name of an ASIO Driver" is shown in the Hardware Device column, WWISEASIODRV must be set to a value of "Name of an ASIO Driver".

	Warning
	The WWISEASIODRV environment variable also overrides the driver selected in Authoring Audio Preferences.

	Warning
	Selecting AK ASIO Output as the Audio Device on multiple master busses is not supported.

	Warning
	Selecting a System Audio Device on a bus while having an ASIO Audio Device on another bus may cause device exclusivity conflicts.

AK ASIO output properties

Interface Element	Description
AK ASIO Output Properties
Channel Configuration	Sets the number of channels and the channel configuration of the output device. See Understanding Bus Configurations for more information. Select default to keep the number of channels of the selected ASIO hardware device. Anonymous configurations are also available to set the number of channels without a standard configuration. To configure anonymous channels, open `C:\Program Files (x86)\Audiokinetic\Wwise <version>\Authoring\x64\Release\bin\plugins\ASIO.xml` and add the line indicated in the following figure. This example shows 6 channels, but any value from 1 to 255 is permitted.
Base Channel	Offsets all the output channels of the bus so that the first channel output is the base channel. Channels are output sequentially starting from the base channel. The default value is 1, which outputs starting from the first channel. For example, setting the base channel to 2 for a stereo configuration (two channels) will output to channels 2 and 3 instead of 1 and 2.

Interface Element

Description

AK ASIO Output Properties

Channel Configuration

Sets the number of channels and the channel configuration of the output device. See Understanding Bus Configurations for more information.

Select default to keep the number of channels of the selected ASIO hardware device.

Anonymous configurations are also available to set the number of channels without a standard configuration. To configure anonymous channels, open C:\Program Files (x86)\Audiokinetic\Wwise <version>\Authoring\x64\Release\bin\plugins\ASIO.xml and add the line indicated in the following figure. This example shows 6 channels, but any value from 1 to 255 is permitted.

Base Channel

Offsets all the output channels of the bus so that the first channel output is the base channel. Channels are output sequentially starting from the base channel.

The default value is 1, which outputs starting from the first channel.

For example, setting the base channel to 2 for a stereo configuration (two channels) will output to channels 2 and 3 instead of 1 and 2.

Related Topics

AK ASIO Input

Was this page helpful?

Need Support?

Questions? Problems? Need more info? Contact us, and we can help!

Visit our Support page

Tell us about your project. We're here to help.

Get started with Wwise

Wwise Help

AK ASIO Output

AK ASIO Output

Monitoring in Wwise authoring through an AK ASIO output device

Selecting an ASIO driver outside of Wwise Authoring

AK ASIO output properties

Was this page helpful?

Need Support?

Tell us about your project. We're here to help.