"description": "Enables extra console text output.",
"synopsis": [
"--verbose"
]
},
"quiet": {
"type": "boolean",
"description": "Disables all non-error console text output.",
"synopsis": [
"--quiet"
]
},
"allowed-addr": {
"type": "string",
"description": "Specifies the IP addresses that are allowed to connect to WAAPI. This option must be followed by a comma-separated list, for example: \"127.0.0.1\". Default value is \"127.0.0.1\".",
"synopsis": [
"--allowed-addr ADDRESS",
"--allowed-addr ADDRESS1,ADDRESS2,..."
]
},
"allowed-origin": {
"type": "string",
"description": "Specifies the hosts that are allowed to connect to WAAPI. This option must be followed by a comma-separated list, for example: \"www.myhost.com,www.myhost2.com\". Validation is performed on the HTTP header Origin. Connections that do not provide the Origin header, as well as file-based connections (for example: file://), are always allowed.",
"synopsis": [
"--allowed-origin HOST",
"--allowed-origin HOST1,HOST2,..."
]
},
"http-port": {
"type": "number",
"description": "Specifies the port number used by WAAPI when using HTTP POST. This option must be followed by a port number between 0 and 65,535. Using 0 prevents the server from running. Default value is 8090.",
"synopsis": [
"--http-port PORT"
],
"minimum": 0,
"maximum": 65535
},
"wamp-port": {
"type": "number",
"description": "Specifies the port number used by WAAPI when using WAMP. This option, which takes precedence over the User Preferences, must be followed by a port number between 0 and 65,535. Using 0 prevents the server from running. Default value is 8080.",
"synopsis": [
"--wamp-port PORT"
],
"minimum": 0,
"maximum": 65535
},
"http-max-clients": {
"type": "number",
"description": "Specifies the maximum number of concurrent WAAPI clients that can connect to the server when using HTTP POST. This option must be followed by a number between 0 and 100. Using 0 will prevent the server from running. Default value is 2.",
"synopsis": [
"--http-max-clients NUM"
],
"minimum": 0,
"maximum": 100
},
"wamp-max-clients": {
"type": "number",
"description": "Specifies the maximum number of concurrent WAAPI clients that can connect to the server when using WAMP. This option must be followed by a number between 0 and 100. Using 0 will prevent the server from running. Default value is 5.",
"synopsis": [
"--wamp-max-clients NUM"
],
"minimum": 0,
"maximum": 100
},
"allow-migration": {
"type": "boolean",
"description": "Allow migration and save of the Wwise project before executing the operation.",
"synopsis": [
"--allow-migration"
]
}
}
}
Was this page helpful?
Need Support?
Questions? Problems? Need more info? Contact us, and we can help!