Version
This Property Editor contains the properties and behavior options for the selected Music Switch Container. Music object properties determine how the music sounds when it is played in your game. Music object behaviors determine which pieces of music are played back at any given point in the game.
The General Settings tab of the Property Editor is divided into three separate areas. The first area includes all the absolute properties, such as output routing. The middle area includes all the relative properties, such as volume and Low-Pass Filter. The last area, on the right, includes all the behaviors, including Switch type, tempo, and time signature.
For a complete description of absolute and relative properties, refer to About Properties in the Interactive Music Hierarchy.
For a description of the properties in the Conversion, Effects, Positioning, RTPC, States, Transitions, Stingers, and Advanced Settings tabs, refer to Common Property Tabs: Interactive Music Objects.
General | |||||||
---|---|---|---|---|---|---|---|
Interface Element |
Description | ||||||
[name] |
The name of the object. | ||||||
![]() |
Displays the object's color. Clicking the icon opens the color selector. ![]() Select a color to apply it to the object. When you choose a color for an object, a palette icon appears on the selected square, as well as a yellow triangle in the lower-right corner, as shown. To inherit the parent object's color, select the square at the far left of the color selector. | ||||||
![]() ![]() ![]() ![]() ![]() |
Controls the Mute and Solo states for the object and shows the implicit mute and solo states for the object. Muting an object silences this object for the current monitoring session. Soloing an object silences all the other objects in the project except this one. A bold M or S indicates that the Mute or Solo state has been explicitly set for the object. A non-bold M or S with faded color indicates that the object's Mute or Solo state was implicitly set from another object's state. Muting an object implicitly mutes the descendant objects. Soloing an object implicitly mutes the sibling objects and implicitly solos the descendant and ancestor objects.
| ||||||
Inclusion |
Determines whether the element is included in the SoundBanks when they are generated. When selected, the element is included. When unselected, the element is not included. To optimize your sound design for each platform, you might want to exclude certain elements on certain platforms. By default, this check box applies across all platforms. Use the Link indicator to the left of the check box to unlink the element. Then you can customize the state of the check box per platform. When this option is unselected, the property and behavior options in the editor become unavailable. Default value: true | ||||||
![]() ![]() |
Indicates the number of elements in your project that contain direct references to the object. The icon is displayed in orange when references to the object exist, and in gray when no references exist. Selecting the button opens the Reference View with the object's name in the References to: field. | ||||||
Notes |
Any additional information about the object properties. | ||||||
![]() |
Sets the display of the Property Editor's selected tabs. By default, there is one panel that displays a single selected tab. You can, however, click a splitter button to display two panels, divided horizontally or vertically. The selected option is highlighted with a background color. You cannot open the same tab in both panels. If you try to open the same tab in both panels, the first panel automatically opens a different tab.
|
Relative Properties | ||||
---|---|---|---|---|
Interface Element |
Description | |||
Voice Volume |
The attenuation (level or amplitude) applied on the current object before it is routed to a bus or sent to an Auxiliary Bus. Refer to Understanding the Voice Pipeline for more information about volumes. Default value: 0
| |||
Voice Low-pass Filter |
A recursive filter that attenuates high frequencies based on the value specified. The units for this filter represent the percentage of low-pass filtering that has been applied, where 0 means no low-pass filtering (signal unaffected) and 100 means maximal attenuation. (For more detail, see Wwise LPF and HPF Value Cutoff Frequencies .) Default value: 0 Range: 0 to 100 Units: % | |||
Cone High-pass filter |
A recursive filter that attenuates low frequencies based on the value specified. The units for this filter represent the percentage of high-pass filtering that will be applied, where 0 means no high-pass filtering (signal unaffected) and 100 means maximal attenuation. The Cone High-pass filter has a link indicator and an RTPC indicator. Refer to Working with the Property Editor for more information. Default value: 0 Range: 0 to 100 Units: % |
Make-up Gain | ||||
---|---|---|---|---|
Interface Element |
Description | |||
Make-up Gain |
Volume gain in decibels (dB) applied to the voice, after all other volume adjustments. The make-up gain is additive across the Actor-Mixer Hierarchy. Refer to Understanding the voice pipeline to learn about how voices are being processed, how they are being routed and where the different volumes and Effects are being applied. For more information about the Make-up Gain, refer to Using Loudness Normalization or Make-up gain to Adjust Volume .
Default value: 0 Range: -200 to 200 Units: dB |
Playback Speed | |||||||
---|---|---|---|---|---|---|---|
Interface Element |
Description | ||||||
Playback Speed |
Adjusts the speed at which the music object’s contents are played:
The Playback Speed affects different media types differently:
Default value: 1 Range: 0.25 to 4 |
Output Bus | |||||||
---|---|---|---|---|---|---|---|
Interface Element |
Description | ||||||
Volume (to Output Bus) |
The attenuation or amplitude of the signal routed to the audio output bus.
Default value: 0 Range: -200 to 200 Units: dB | ||||||
Low-pass Filter (to Output Bus) |
A Low-Pass Filter for the signal routed to the audio output bus. A recursive filter that attenuates high frequencies based on the value specified. The units for this filter represent the percentage of Low-Pass Filtering that has been applied, where 0 means no Low-Pass Filtering (signal unaffected) and 100 means maximal attenuation. Default value: 0 Range: 0 to 100 Units: % | ||||||
High-pass Filter (to Output Bus) |
A High-Pass Filter for the signal routed to the audio output bus. A recursive filter that attenuates low frequencies based on the value specified. The units for this filter represent the percentage of High-Pass Filtering that has been applied, where 0 means no High-Pass Filtering (signal unaffected) and 100 means maximal attenuation. Default value: 0 Range: 0 to 100 Units: % |
Game-defined Auxiliary Sends | ||||
---|---|---|---|---|
Interface Element |
Description | |||
Override parent |
Determines whether the game-defined auxiliary sends usage will be inherited from the parent or defined at the current level in the hierarchy. When this option is not selected, the game-defined auxiliary controls are unavailable.
Default value: false | |||
Use game-defined auxiliary sends |
Determines whether the object is using the game-defined auxiliary sends for the game object. A game-defined send is a combination of an Auxiliary Bus and a send volume. Enable this option to have the object affected by the values coming from the game for the following functions: If the game has initialized Spatial Audio and sent Rooms and Portals data to Wwise, this property determines if the object should send to the Auxiliary Bus defined by the current Room that the game object is inside. Default value: false | |||
Volume (Game-defined auxiliary sends) |
Determines the attenuation on the game-defined auxiliary sends volumes set for the game object. Use this volume to offset game-defined auxiliary send values.
Default value: 0 Range: -200 to 200 Units: dB | |||
|
User-Defined Auxiliary Sends | |||||||
---|---|---|---|---|---|---|---|
Interface Element |
Description | ||||||
Override Parent |
Determines whether the User-Defined Auxiliary Sends usage will be inherited from the parent or defined at the current level in the hierarchy. When this option is not selected, the user-defined auxiliary controls are unavailable.
| ||||||
![]() |
Click the Configure Columns... shortcut (right-click) option from the column header band. The Configure Columns Dialog opens. Specify which columns to display and their order. | ||||||
ID column (User-Defined Auxiliary Sends) |
Determines the ID of the User-Defined Auxiliary Sends. Up to 4 different sends can be added. | ||||||
User Auxiliary Send |
Determines the Auxiliary Bus this object is sending audio data to. Auxiliary sends can only target Auxiliary Busses. To add an auxiliary send:
| ||||||
[...] column (User-Defined Auxiliary Sends) |
Allow to select an Auxiliary Bus from the Master-Mixer Hierarchy. | ||||||
User-Defined Auxiliary Send Volume |
Determine the attenuation of the signal sent to the Auxiliary Bus.
Default value: 0 Range: -200 to 200 Units: dB | ||||||
|
Early Reflections Auxiliary Sends | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Interface Element |
Description | ||||||||||||
Override parent |
Determines whether the early reflections auxiliary sends usage will be inherited from the parent or defined at the current level in the hierarchy. When this option is not selected, the early reflections auxiliary controls are unavailable.
Default value: false | ||||||||||||
Early Reflections Auxiliary Send |
Enables reflection processing in Wwise Spatial Audio and determines the Auxiliary Bus this object is sending to for early reflections processing. Early reflections processing simulates the acoustic phenomenon of sound bouncing off of virtual surfaces defined by geometry in the game. Since the first few reflections convey the most spatial information to the listener, it is advantageous to process the early reflections separately (from the late reverb) and with more detail using the Reflect plug-in. To render early reflections, the Reflect plugin must be assigned to an effect slot on the Auxiliary Bus assigned to an early reflections send. If no send is specified, then Wwise Spatial Audio will not compute early reflections paths for the sound.
To add an auxiliary send:
| ||||||||||||
Early Reflections Auxiliary Send Volume |
Determine the attenuation of the signal sent to the reflections Auxiliary Bus. This control also effects the volume of the reflections aux send specified by the API.
Default value: 0 Range: -200 to 200 Units: dB |
Time Settings | |
---|---|
Interface Element |
Description |
Override parent |
Determines whether the time settings behaviors will be inherited from the parent or defined at the current level in the hierarchy. When this option is not selected, the time settings controls are unavailable. If the object is a top-level object, this option is unavailable. Default value: false |
Tempo |
The speed or pace of the music object. This setting should match the tempo of the original music source. The tempo and time signature settings define the timeline ruler in the Music Editor, so you can easily position sync points at the next beat, bar, or grid. Default value: 120 Range: 1 to 400 Units: BPM |
Time Signature |
The number and length of beats to the bar. This setting should match the time signature of the original music source. Default value: 4 Range: 1 to 64 |
Grid | |
Frequency |
Specifies an arbitrary method by which the Music Segment can be virtually partitioned. By adding another level of granularity to the Music Segment, you have a great deal of flexibility to determine sync points for music transitions, state changes, and stingers. The Frequency and Offset settings define the behavior of the Next Grid option for state changes, transitions, and stingers. Default value: 4 Bars |
Offset |
Creates an offset to the frequency value. You can select a standard offset value from the list or create a custom offset in milliseconds. Default value: No |
Offset Ms |
The offset in milliseconds. Applicable if specifying a Custom offset. Default value: 0 Range: 0 to 99999 |
Music Switch Container Specific | |
---|---|
Interface Element |
Description |
Switch Type | |
Switch |
Plays music objects within the container according to switches. |
State |
Plays music objects within the container according to states. |
Switch Group |
The Switch or State Group assigned to the current container. The Group list contains all the Switch or State Groups that currently exist for the current project. The contents of the Group list depends on whether Switch or State is selected. |
Default Switch/State |
The Switch/State that will be played when the game cannot identify a specific Switch or State. |
![]() |
Displays the selected state or Switch Group in the Game Syncs tab of the Project Explorer. |
Play Options | |
Continue to play on Switch change |
Determines whether a music object that is in more than one Switch will continue to play when a new Switch is triggered. If this option is selected and the music object is in both Switches, it will continue playing as if no Switch change had occurred. If a change in Switch occurs and this option is unselected, the music object will stop playing at the next sync point and will start again from the beginning. Default value: true |
Questions? Problems? Need more info? Contact us, and we can help!
Visit our Support pageRegister your project and we'll help you get started with no strings attached!
Get started with Wwise