Wwise Help

Name

The name of the Effect instance.

Effect instances are a group of effect property settings. They can be one of two types: custom instances or ShareSets. Custom instances can be used by only one object, whereas ShareSets can be shared across several objects.

Displays the object's color. Clicking the icon opens the color selector.

Select a color to apply it to the object.

	Note
	Selecting the square at the far left of the color selector causes the object to inherit its parent's color. When a color has been explicitly chosen for an object, it is displayed with the palette icon and a yellow triangle in the lower-right corner, as shown.

Inclusion

Determines whether the element is included or excluded. When selected, the element is included. When unselected, the element is not included. By default, this applies across all platforms. Use the Link indicator (to the left of the check box) to determine or to set platform-specific customizations.

When this option is unselected, the property and behavior options in the editor become unavailable.

Default value: true

Indicates the number of elements in your project that contain direct references to the object. The icon is displayed in orange when references to the object exist, and in gray when no references exist.

Selecting the button opens the Reference View with the object's name in the References to: field.

Notes

Additional information about the Effect.

Metering

Indicates the name of the object currently being metered.

Sets the display of the Effect Editor's selected tabs. By default, there is one panel displaying only one selected tab. You can, however, click a splitter button to split the panel into two, either side by side or one on top of the other, for two different tabs. The currently selected option is highlighted with a background color.

	Note
	You cannot display the same tab in both panels. If you select the tab that is currently displayed in the other panel, then the other panel will automatically display another tab.

Left/Right Delay Parameters

Input

This parameter determines which channel(s) will be used to feed the corresponding (left or right) delay line.

Values:

Default value: Right

Enable Feedback

This parameter determines whether the output of the delay line is fed back to the input of the same delay length.

Default value: false

Feedback

Gain applied to the feedback path before its re-injection into the same delay line input.

	Warning
	Using high feedback gains can build up very high signal levels depending on the input signal content.

Default value: -12
Range: -48 to 0
Units: dB

Enable Crossfeed

This parameter determines whether the output of the delay line is fed back to the input of the delay length of the other channel’s delay line. Left delay output can thus feed the right delay input and vice versa. This setting allows to create ping-pong type stereo-delays.

Default value: false

Crossfeed

Gain applied to the feedback path before its re-injection into the other channel delay line input.

	Warning
	Using high crossfeed gains can build up very high signal levels depending on the input signal content.

Default value: -12
Range: -48 to 0
Units: dB

Filter Parameters

Filter Type

Determines the type of filtering that can be applied to the wet signal. The following filters are available:

Default value: None

Filter Gain

The amount of the amplification of the wet signal for the selected frequency band. Increasing this value “boosts” the audio signal. Decreasing this value “cuts” or attenuates the audio signal.

	Note
	The Gain controls are not available when the Low Pass, High Pass, Notch, and Band Pass curves have been selected because these filter types have their passband normalized at 0 dB.

Default value: 0
Range: -24 to 24
Units: dB

Filter Frequency

The portion of the frequency spectrum that will be affected by the gain.

Default value: 1000
Range: 20 to 20000
Units: Hz

Filter Q Factor

The area around the center frequency that will be affected by the change in gain. A low Q value means that the bandwidth range will be wide, and conversely a high Q value means that the bandwidth range will be narrow.

This control is not available when the Low Pass, High Pass, Low Shelf, and High Shelf curves have been selected.

Default value: 1
Range: 0.1 to 20

Output Levels

Dry Level

Gain applied to unprocessed signal.

Default value: 0
Range: -96 to 24
Units: dB

Wet Level

Gain applied to the delayed signal.

Default value: 0
Range: -96 to 24
Units: dB

Front/Rear Balance

Front/rear extent of the stereo effect. For example a value of -100 will only have wet signal in the front channels. A value of 0 will have wet signal in both front and rear speakers. A value of 100 will have wet signal only in the rear channels.

Default value: -100
Range: -100 to 100