menu
 
Version
2017.1.9.6501

2024.1.5.8803

2023.1.13.8732

2022.1.19.8584

2021.1.14.8108

2019.2.15.7667

2019.1.11.7296

2018.1.11.6987

2017.2.10.6745

2017.1.9.6501

2016.2.6.6153

2015.1.9.5624

menu

Specifying Output Routing for Motion

If you plan to generate motion data from an existing audio source, you need to first specify through which motion bus the motion data will be routed. Motion data is different than audio data, and requires a separate hierarchy of motion busses through which the motion data can be routed. You can create this separate hierarchy under the Master Motion Bus in the Master-Mixer Hierarchy. For more information on creating a motion bus hierarchy, refer to Overview.

To specify the output routing for motion data:

  1. Load a top-level object into the Property Editor.

    info Note

    If the object is not a top-level object, you must select the Override parent option before you can set the Motion Output options.

  2. In the Motion Output Bus group box, click the Browse button (...).

    The Project Explorer - Browser opens.

  3. Select the motion bus through which you want the motion data to be routed.

  4. Click OK.

    The motion data generated from the current object and any child objects below it is now routed through the selected motion bus.


Was this page helpful?

Need Support?

Questions? Problems? Need more info? Contact us, and we can help!

Visit our Support page

Tell us about your project. We're here to help.

Register your project and we'll help you get started with no strings attached!

Get started with Wwise